per
انجمن علمی بتن ایران
مصالح و سازه های بتنی
2538-5828
2676-5969
2017-11-22
2
2
5
19
10.30478/jcsm.2017.60849
60849
Original Article
تأثیر استفاده از بتن پرمقاومت در روابط طراحی مقاومت برش سوراخکنندهی صفحات تخت بتنآرمه
The Effect of High-Strength Concrete on Punching Shear Strength of Reinforced Concrete Flat Plates
مروارید حاجیان
hajian.m@ut.ac.ir
1
سیدعلیرضا فاطمی
a.fatemi@aut.ac.ir
2
ایرج محمودزاده کنی
imkani@ut.ac.ir
3
دانشکده عمران، پردیس دانشکدههای فنی، دانشگاه تهران، تهران، ایران
دانشکده عمران، دانشگاه صنعتی امیرکبیر، تهران، ایران
دانشکده عمران، پردیس دانشکدههای فنی، دانشگاه تهران، تهران، ایران
بتن پرمقاومت به علت خصوصیات بهبودیافتهی خود به طور گستردهای در چند دههی اخیر مورد استفاده قرار گرفته است. از بتن پرمقاومت در صفحات تخت نیز استفاده میشود. صفحات تخت به علت عمق محدودشان مستعد شکست تحت برش سوراخکننده هستند. اکثر آییننامههای طراحی بتن، برپایهی آزمایشات روی نمونههای ساختهشده با بتن معمولی تدوین شدهاند. حال آنکه بتن پرمقاومت در مقایسه با بتن معمولی مکانیزمهای گسیختگی متفاوتی دارد. ازینرو ضروری است تا روابط آییننامهها درخصوص بتن پرمقاومت ارزیابی شوند. هدف این مقاله بررسی اثرات استفاده از بتن پرمقاومت در روابط طراحی و یافتن مناسبترین رابطه برای تخمین مقاومت برش سوراخکنندهی صفحات تخت با ستون داخلی میباشد. روابط طراحی مورداستفاده در این پژوهش شامل روابط آییننامههای طراحی ACI 318، Eurocode2، BS 8110، DIN 1045 و شش رابطهی پیشنهادی توسط محققین برای بتن پرمقاومت میباشند. برای بررسی صحت روابط طراحی، از 50 نتیجهی آزمایشگاهی برگفته از ادبیات فنی روی نمونههای دال ساختهشده با بتن پرمقاومت استفاده شده است و بهترین رابطه برای تخمین ظرفیت برش سوراخکننده پیشنهاد میشود.
High strength concrete (HSC) has been used widely over the last decade due to its improved characteristics. HSC has also been widely used in flat plates. Flat plates due to their limited depth are sensitive to punching shear. Most of the current design codes are based on empirical researches conducted on normal strength concrete (NSC) specimens. HSC has different fracture mechanisms compared to NSC. Therefore, it is essential to re-examine codes equations in order to be proper for HSC members. The aim of this paper is to investigate the effect of using HSC on current design relationships and find the most convenient formula for predicting the punching shear capacity of interior slab-column connections. Design formulas used in this research consist of four design codes, ACI 318, Eurocede2, BS 8110, DIN 1045 and six proposed formulas by other researchers for HSC flat plates. For checking the accuracy of these design methods, 50 test results from the literature conducted on HSC slab specimens are elected to compare with formulas.
https://www.jcsm.ir/article_60849_94d8ea3b997fbf4cc93b4624ce7f1d7c.pdf
بتن پرمقاومت
مقاومت برشی سوراخکننده
صفحات تخت
محل تقاطع دال و ستون داخلی
high strength concrete
punching shear strength
flat plates
interior slab-column connections
per
انجمن علمی بتن ایران
مصالح و سازه های بتنی
2538-5828
2676-5969
2017-11-22
2
2
20
31
10.30478/jcsm.2017.60973
60973
Original Article
بررسی تأثیر چیدمان های رایج ورق FRP بر بهبود عملکرد لرزه ای اتصال کناری تیر به ستون بتن آرمه
The inspection of effects of common arrangements of FRP sheets on improvement of seismic performance of concrete beam-column side joints
محمدعلی عباسی
ma.abbasi2008@yahoo.com
1
غلامرضا عاطفت دوست
gh_atefatdoost@iauest.ac.ir
2
گروه عمران دانشگاه آزاد اسلامی استهبان
گروه عمران
دانشگاه آزاد اسلامی استهبان
در سازه های بتن آرمه به طور خاص با سیستم قاب خمشی، اتصالات تیر- ستون نقش کلیدی در استهلاک انرژی زلزله دارند . در زلزله های گذشته آسیب پذیر بودن این اتصالات بارها گزارش شده است لذا در سازه های آسیب پذیر بهسازی عملکرد لرزه ای این اتصالات می تواند به بهبود عملکرد کل سازه کمک کند . بهسازی لرزه ای اتصالات به کمک الیاف FRP در سالهای اخیر به طور وسیعی مورد توجه قرار گرفته است . تحقیقات گذشته نشان داده که آرایش یا چیدمان ورقهای FRP می تواند در بازدهی این روش مقاومسازی تاثیرگذار باشد .در این تحقیق پنج آرایش از ورقهای FRP بر روی یک اتصال کناری مورد بررسی قرار گرفت و نمودار هیسترزیس بار جابه جایی ومقادیر نیاز لرزه ای 4 گانه اعم از استحکام ،شکل پذیری ، استهلاک انرژی ، سختی اولیه اتصال و همچنین مکانیزم های شکست مورد بررسی قرار گرفت که در نهایت آرایش بهینه پیشنهاد گردید . بهینه ترین آرایش تقویت به ازاء کلیه مقادیر چند گانه نیاز لرزه ای ، آرایش ضربدری می باشد که بیشترین تاثیر در بهبود عملکرد لرزه ای اتصال تقویت نشده را نسبت به سایر آرایشها دارد . کلیه مدل ها به روش عددی اجزا محدود در نرم افزار آباکوس ایجاد گردیده و در کلیه حالات، بارگذاری به صورت سیکلیک اعمال شده است .
In reinforced concrete structures and especially those involving bending frame systems, beam-column joints have a key role in seismic energy dissipation. In past earthquakes, the vulnerability of these joints has been reported several times. Hence, in vulnerable structures, seismic performance improvement of these joints can help improve the overall structural performance. Seismically retrofitted joints using FRP has been widely under focus in recent years. Past researches have shown that the type of FRP sheets and their arrangements can influence the efficiency of this method of retrofitting.In this research, five arrangements of FRP sheets on a side joint have been examined and the load–displacement chart and seismic demand values such as strength, ductility, energy absorption and primary stiffness as well as failure mechanisms are examined and finally the optimal arrangement is offered. The most optimal strengthening arrangement against all values of seismic demands is observed to be the crosswise arrangement which is the most effective to improve the seismic performance of non-strengthened joint in comparison with the other arrangements. All models are made in the ABAQUS software through the finite element method scheme and in all simulations cyclic loads are used.
https://www.jcsm.ir/article_60973_8f7ffaca7a4aa7cf244f7bd4eb366b62.pdf
اتصال تیر-ستون
ورق FRP
نیاز لرزه ای
چیدمان ورق FRP و آرایش بهینه
beam to column joint
FRP sheet
quake demand
FRP sheet arrangement
optimal arrangement
per
انجمن علمی بتن ایران
مصالح و سازه های بتنی
2538-5828
2676-5969
2017-11-22
2
2
32
43
10.30478/jcsm.2017.60850
60850
Original Article
مدلسازی ترمودینامیکی حمله سولفاتی خمیر سیمان سختشده حاوی سرباره و بررسی تاثیر محلولهای سولفاتی مختلف
Thermodynamic modeling of sulfate attack on hardened cement paste containing slag and investigation of the effect of various sulfate solutions
امیر طریقت
tarighat@srttu.edu
1
یاقوت مدرس
yaghout.modarres@gmail.com
2
دانشیار دانشکده مهندسی عمران، دانشگاه تربیت دبیر شهید رجایی
دانشگاه تربیت دبیر شهید رجایی
نفوذ یونهای سولفات به داخل مواد سیمانی منجر به تشکیل فازهایی همچون گچ و اترینگایت میشود که انبساط و خرابی بتن را به دنبال دارند. در این مقاله از مدلسازی ترمودینامیکی، برای درک بهتر رفتار خمیر سیمان سخت شده طی حمله سولفات خارجی، استفادهشده است. این مدل بر اساس روش به حداقل رساندن انرژی آزاد گیبس میباشد. با کمک این مدلسازی علاوه بر بررسی نوع و حجم فازهای تشکیلشده طی حملهی سولفاتی، عوامل تأثیرگذار بر آن همچون نوع و غلظت محلولهای سولفاتی مختلف، شیمی سیمان، اثر سرباره و درصد بهینه جایگزینی آن موردمطالعه قرارگرفته است. نتایج مدل-سازی نشان میدهد که در میان محلولهای سولفاتی، محلول سولفات منیزیم اثر خرابی بیشتری دارد؛ تجزیه ژل سیلیکاتی نیز که عمده مقاومت در نمونه را تأمین مینماید با توجه به میزان گچ و بروسیت تولیدی و همچنین حفظ تعادل برای بالا بردن pH، در این محلول بیشتر اتفاق میافتد. در مورد سرباره، جایگزینی زیر 40 درصد به علت افزایش فازهای مضر مانند منوسولفات و اترینگایت مطلوب نیست و در بالای 60 درصد جایگزینی عملکرد مناسبی از خود نشان داده است. بهطورکلی نتایج حاصل از این مدلسازی با مطالعات و نتایج آزمایشگاهی که ریزساختار را بررسی نمودهاند تطابق خوبی دارد.
Sulfate attack is a series of physico-chemical reactions between hardened cement paste and sulfate ions. Sulfate ion penetration into the hydrated cement results in the formation of voluminous and deleterious phases such as gypsum and ettringite which are believed to cause deterioration and expansion of concrete. However, there is no direct relationship between Ettringite or solids formation during sulfate attack and amount of expansion. Concrete deterioration due to sulfate attack depends on many parameters, however, in experimental studies, the implementation of the parameters and obtaining the results in a short time are too difficult. Therefore, the significance of theoretical and software modeling along with experimental studies, reducing the time and cost, increases insight of the obtained results. Thermodynamic modeling, in this paper, is employed according to the method of minimizing Gibbs free energy in order to have better understanding of the external sulfate attack on the cement paste; It is done by the GEM software which is able to calculate the stable phase as a function of reactants, temperature and pressure. Type and volume of phases formed during the sulfate attack and factors affecting that such as sulfate solution with different concentrations were studied using the thermodynamical modeling. Hardened cement paste at 20 ° C and water-cement ratio of 0.5 were assumed in the modeling. Potassium/Sodium/Magnesium sulfates, among other sulfate solutions, with concentrations of 4, 44, 50, and 60 grams per litre were used. Since the slag systems generally exhibit appropriate behaviour in the high level of substitution, slag substitution up to 80 percent is examined. A replacement rate of slag lower than 40 percent, due to the increase of deleterious phases such as monosulfate and ettringite, is not optimum, however, the function of the slag replacement rate above 60% is satisfactory. According to the type and volume of formed products in sulfate solutions, we can conclude that magnesium sulfate solution has higher deterioration effect. Generally, the results correspond to existing studies agree with the experimental results.
https://www.jcsm.ir/article_60850_5aca5c7170a81d4257ea1935e0ef6293.pdf
حمله سولفاتی
مدلسازی
ترمودینامیک
سیمان پرتلند
سرباره
Sulfate attack
Modeling
Thermodynamic
Portland Cement
Slag
per
انجمن علمی بتن ایران
مصالح و سازه های بتنی
2538-5828
2676-5969
2017-11-22
2
2
44
53
10.30478/jcsm.2017.60851
60851
Original Article
اثر ترک بر باربری تراورس بتنی پیشتنیده B70 با استفاده از تحلیل مکانیک شکست
Crack effect on pre-stressed concrete sleeper B70 with fracture mechanics analysis
سید محمد فرنام
seyed.farnam@yahoo.com
1
فریدون رضایی
2
مهندسی عمران- مهندسی- بوعلی سینا- همدان- ایران
مهندسی عمران- مهندسی- بوعلی سینا- همدان- ایران
در این پژوهش با تکیه بر اصول مکانیک شکست در بتن مسلح، رفتار شکست در تراورس بتنی پیشتنیده B70 به روش عددی و آزمایشگاهی تحلیل شده است. در بخش عددی این پژوهش، مدل غیرخطی خرابی پلاستیک با استفاده از نرمافزار Abaqus و در بخش آزمایشگاهی، روشهای رپلیکاگیری و تحلیل عکس استفاده شده است. تراورسها با طول پیشترک از صفر تا 45 میلیمتر و عرض پیشترک از صفر تا 8 میلیمتر تحت بار سه نقطهای لنگر خمشی منفی وسط دهانه قرار گرفتهاند. در این پژوهش میزان کاهش مقاومت قطعهی تراورس پیشترکدار در ایجاد ترک و ناپایداری ترک (شکست) برآورد است. نتایج نشان میدهند که وجود پیش ترک آنهم با عرضهای بسیار کوچک باعث کاهش مقاومتهای بسیار زیاد در نتایج آزمایشهای 28 روزه تراورس میشوند که در طرحهای مقاومتمصالحی اصلا دیده نشده است. در نتیجه طرح مقاومت مصالحی موجود برای طراحی قطعهی تراورس تا زمانی پاسخگو است که هیچ آسیب یا پیشترکی در قطعه وجود نداشته باشد. همچنین به نظر میرسد برای تحلیل و طراحی یک قطعهی بتن پیشتنیدهای مانند تراورس احتیاج به بازرسیهای دقیق در مورد وجود عیب در آن وجود دارد تا در صورت نیاز با تحلیل مکانیک شکست بههمراه تحلیل مقاومت مصالحی ظرفیت قطعه و بهطبع آن عمر قطعه تخمین زده شود.
In this research, the principles of fracture mechanics in concrete, pre-stressed mono block concrete sleeper of B70 is analyzed with numerical and experimental method. Plastic damage nonlinear analysis with Abaqus software and Replica test and image analysis are research methods in numerical and experimental study, respectively. To evaluate fracture mechanics parameters, a pre-stressed concrete sleeper with an initial crack length from 0 to 45 mm and crack width from 0 to 8 mm is being loaded under three-point bending test and has been modeled in FE software, simultaneously. In this study, strength decrease of notched sleeper is evaluated in initial and unstable crack. The results show that notch with small width (sharp notch) is caused strength decrease that it doesn’t show in the strength of materials design. As a result, the strength of materials design as long as responsive that there aren’t any fault or notch in the element. Also, for analysis and design of pre-stressed concrete element like sleeper, it needs accurate inspections about fault or notch existence to estimate capacity and life of sleeper with the fracture mechanics analysis together the strength of materials design.
https://www.jcsm.ir/article_60851_0df59959843a9bb5c48ca6e95afd86de.pdf
طراحی مقاومت مصالح
طراحی مکانیک شکست
تراورس بتنی پیشتنیده
درصدکاهش مقاومت
The strength of materials design
the fracture mechanics analysis
pre-stressed concrete sleeper
strength decrease percent
per
انجمن علمی بتن ایران
مصالح و سازه های بتنی
2538-5828
2676-5969
2017-11-22
2
2
54
75
10.30478/jcsm.2017.60852
60852
Original Article
طراحی بهینه ستونهای بتنی تقویت شده با FRP به کمک الگوریتم آموزش و یادگیری
Optimum Design of R.C. Columns Reinforced by FRP Using TLBO Algorithm
سید روح الله حسینی واعظ
hoseinivaez@qom.ac.ir
1
محمدرضا رضایی
rezaei7076@gmail.com
2
استادیار، دانشکده فنی و مهندسی، دانشگاه قم
گروه مهندسی عمران، دانشکده فنی و مهندسی، دانشگاه قم
طراحی بهینه اقتصادی یکی از اهداف اصلی مهندسی عمران میباشد. امروزه جهت تقویت مقاطع بتنی ستونها از الیافی تحت عنوان الیاف FRP استفاده میشود. این الیاف در سه نوع کربنی، شیشه و آرامید در بازار موجود است. در این مطالعه از الگوریتم فراابتکاری آموزش و یادگیری برای تعیین ابعاد مقطع ستون و میلگردهای ستون و همچنین تعداد لایههای FRP مورد نیاز جهت تقویت استفاده شده است. الگوریتم فراابتکاری مورد نظر با توجه به محدودیتها و قیدهایی که برای طراحی درنظر گرفته شده است، ابعاد مقطع بتنی و میلگردها را تعیین میکند و سپس ظرفیت مقطع را بررسی کرده چنانچه به مقاومسازی نیاز داشته باشد، از تعدادی لایه FRP برای تقویت مقطع استفاده میکند. تابع هزینه شامل هزینه بتن، میلگرد و FRP مصرفی جهت تقویت است، که بهعنوان تابع هدف معرفی گردیدهاست. ضوابط طراحی و محدودیتهای طراحی بر مبنای آییننامه ACI 440-08 و ACI 318-14، بهصورت قید پیادهسازی و فرمولنویسی شده است. بنابراین مجموعه تابع هدف و قیدها بهنحوی با هم در ارتباط هستند تا کمترین هزینه بر مبنای تابع هدف با برقراری تمام قیود (طرحی قابل قبول)، در نقطهای به نام طرح بهینه حاصل شود. با توجه به نتایج حالت های مختلف، در صورت استفاده از ابعاد و تعداد میلگردهای معرفی شده توسط الگوریتم استفاده از الیاف کربنی با صرفه اقتصادی بیشتری روبهرو میشود.
Optimum economic design is one of the main goals of civil engineering. Today, reinforced concrete the columns reinforced fibers called FRP fibers. The fiber is available in three types of carbon, glass, and aramid. In this study, the teaching and learning metaheuristic algorithm used to determine the dimensions of the column and steel bars, as well as the number of FRP layers needed for reinforcement. Considering the limitations and constraint that are intended for design, the algorithm determines the dimensions of the concrete cross-section and the bars, and then examines the cross-sectional strength and, if required for reinforcement, a number of FRP layers to reinforce the cross-sectional will use. The cost function includes the cost of concrete, reinforcing, and the FRP, which has been introduced as a target function. Design criteria and design constraints are implemented and formulated in accordance with the ACI 440-08 and ACI 318-14. Therefore, the set of target functions and constraints are related to each other so that the lowest cost based on the objective function is achieved by establishing all constraints (acceptable design) at a point called the optimal design. According to the results, using the dimensions of the column and number of bars represented by the algorithm, CFRP use is more cost effective.
https://www.jcsm.ir/article_60852_434863bb5bb49dd7b640f7e8ef48475c.pdf
الیاف FRP
الیاف کربنی
سازههای بتنی
تقویت ستونها
بهینهسازی
الگوریتم TLBO
FRP Fiber
carbon fiber
RC buildings
strengthen of columns
optimization
TLBO algorithm
per
انجمن علمی بتن ایران
مصالح و سازه های بتنی
2538-5828
2676-5969
2017-11-22
2
2
76
88
10.30478/jcsm.2017.60848
60848
Original Article
بتنهای حاوی سرباره مس و زئولیت طبیعی: بررسی دوام و رفتار الکتروشیمیایی- 01
Concrete containing natural zeolite and copper slag: Durability and electrochemical properties-02
جعفر سبحانی
ja_sobhani@yahoo.com
1
مهدی چینی
mchini@hotmail.com
2
عضو هیات علمی و رئیس بخش فناوری بتن مرکز تحقیقات راه، مسکن و شهرسازی
عضو هیات علمی مرکز تحقیقات راه، مسکن و شهر سازی
چکیده:امروزه روش طیفنگاری امپدانس الکتروشیمیایی که به عنوان یکی از روشهای کلیدی در الکتروشیمی و علم مواد مطرح است، بطور گستردهای برای تعیین خواص الکتریکی انواع بتن و به ویژه لایه مرزی میلگرد و بتن مورد استفاده قرار گرفته است. در این مقاله، ضمن معرفی این روش، طیف امپدانس نمونههای بتن مسلح ساخته شده به صورت مخلوطهای سه جزئی و دو جزئی حاوی زئولیت و سرباره مس مورد مطالعه قرار گرفته است. علاوه بر این، مدارهای الکتریکی مناسبی که قابلیت شبیهسازی چنین طیفهایی را داشته باشند برای تحلیل رفتار لایه مرزی بین فولاد و این نوع بتنها ارائه شده است. نتایج بدست آمده از این تحقیق نشان میدهد که استفاده از زئولیت و سرباره مس، شاخصهای دوام بتن شامل نفوذ آب و یون کلراید را تا حد زیادی بهبود داده است. همچنین با ارائة مدل الکتریکی و تعیین مقاومت پلاریزاسیون و محاسبه سرعت خوردگی با استفاده از رابطه استرن-گری، مشخص شد که استفاده از این مواد با افزایش مقاومت پلاریزاسیون، شدت جریان خوردگی را تا حدود 65 درصد کاهش میدهد.کلید واژه: زئولیت طبیعی، سرباره مس، رفتار الکتروشیمیایی، مدار معادل، دوام بتن
Recently, the electrochemical impedance spectrometry (EIS) has been found as a key method in the field of materials science and electrochemistry for determination of electrical behavior of concrete and especially the interfacial zone of steel-concrete layer. In this paper, EIS of reinforced concretes made with binary and ternary combination of zeolite and copper slag as supplementary cementitious material were examined in an experimental research. Moreover, equivalent electrical circuits fitted for evaluation of steel/concrete interface of such concretes. The results showed that zeolite and copper slag enhanced the durability properties of concrete including the water and chloride permeability indexes. Also, with aid of electrical models and determining the polarization resistance with stern- geary equation, it was found that these martials increased the polarization resistance leading to the decrease of corrosion rate up to 65%. Keywords: Natural zeolite, copper slag, electrochemical behavior, equivalent circuit, concrete durability
https://www.jcsm.ir/article_60848_df5bcc560246e2fe7298b51c42bcc82d.pdf
کلید واژه: زئولیت طبیعی
سرباره مس
رفتار الکتروشیمیایی
مدار معادل
دوام بتن
"Concrete durability"
"natural zeolite"
"copper slag"
" electrochemical properties"
per
انجمن علمی بتن ایران
مصالح و سازه های بتنی
2538-5828
2676-5969
2017-11-22
2
2
89
98
10.30478/jcsm.2017.60855
60855
Original Article
بررسی اثر زئولیت بر کارایی بتن خود متراکم
Effect of Zeolite on workability of self-compacting concrete
محمدرضا نبی زاده شهربابک
nabizade@civileng.iust.ac.ir
1
مصطفی خانزادی
khanzadi@iust.ac.ir
2
سید رضا باقری
rezabagheri2012@gmail.com
3
ولی الله قلعه نوی
4
کارشناس ارشد، مهندسی ژئوتکنیک، دانشکده مهندسی عمران ، دانشگاه علم و صنعت ایران
دانشیار، عضو هیئت علمی، دانشکده مهندسی عمران، دانشگاه علم و صنعت ایران
کارشناس ارشد، مهندسی و مدیریت ساخت، دانشکده مهندسی عمران، دانشگاه علم و صنعت ایران
دانشجوی دکتری، مهندسی ژئوتکنیک، دانشکده مهندسی عمران، دانشگاه علم و صنعت ایران
امروزه استفاده از مواد دورریز مفید و پوزولان های طبیعی در راستای کاهش هزینه های جاری و همچنین کاهش یا حذف مشکلات زیست محیطی به یکی از مباحث مورد علاقه اکثر محققین تبدیل شده است و از طرفی استفاده از این مواد علاوه بر کمک به بهبود خواص بتن به یکی از بحث های مهم در زمینه توسعه پایدار نیز تبدیل شده است. در این پژوهش امکان استفاده از زئولیت به عنوان یک پوزولان طبیعی که خواص پوزولانی از خود نشان می دهد در بتن خودمتراکم بررسی گردید. برای این منظور اثر جایگزینی زئولیت با درصدهای مختلف برروی خواص بتن تازه و مقامت فشاری بتن سخت شده بررسی گردید. نتایج آزمایشات نشان داد که زئولیت باعث بهبود عملکرد بتن خودتراکم در حالت تازه می-شود، زئولیت چسبناکی و پایداری بتن را افزایش و آب انداختگی را کاهش می دهد. ضمن اینکه زئولیت در سنین اولیه سبب کاهش مقاومت بتن سخت شده می شود. اما در سنین 28 و 90 روز مقاومتی برابر و حتی بیشتر از بتن پایه را کسب می کند.
Nowadays, the use of waste materials and natural pozzolans in order to reduce costs as well as reduce or eliminate environmental problems has become one of the topics of interest to the majority of researchers. In addition to improvement of concrete properties and characteristics, usage of these waste materials also plays a great rule in sustainable development.In this study, the possibility of using zeolite as a natural pozzolan in SCC was evaluated. For this purpose, the effect of substitution of zeolites with different percentages on the properties of fresh concrete and hardened concrete compressive resistance was evaluated. The results showed that zeolite can improve the performance of SCC in the fresh state, increases the viscosity and stability of concrete and reduces segregation. While the zeolite reduces the strength of concrete at early ages, but in the ages of 28 and 90 days, resistance against the base concrete gets even more.
https://www.jcsm.ir/article_60855_bb2025cb5010662a36820958ca227119.pdf
بتن خود متراکم پوزولانی
زئولیت
کارائی بتن خود متراکم
توسعه پایدار
Pozzolanic SCC
Zeolite
Workability of self-compacting concrete
sustainable development
per
انجمن علمی بتن ایران
مصالح و سازه های بتنی
2538-5828
2676-5969
2017-11-22
2
2
99
109
10.30478/jcsm.2017.60857
60857
Original Article
بررسی آزمایشگاهی و تئوری ستونهای بتنآرمه شامل وصله میلگردها و فورجینگ (جوش سر به سر) تحت بار محوری با فولاد عرضی به صورت حلقه مجزا
Experimental Investigation of Reinforced Concrete Columns Consisting of Overlap Spliced and Forge Welded Steel Bars Under Uniaxial Load with Tied Stirrups
امیررضا طغرلی پور
amirrezatoghroli@yahoo.com
1
علی اکبر مقصودی
maghsoudi.a.a@uk.ac.ir
2
گروه عمران، دانشکده فنی و مهندسی، دانشگاه شهید باهنر کرمان، ایران
گروه عمران، دانشکده فنی و مهندسی، دانشگاه شهید باهنر کرمان، کرمان، ایران
در تحقیق حاضر، چهار ستون بتن آرمه کوتاه با مقطع دایرهای در آزمایشگاه ساخته شده است که در یک گروه دسته بندی شده است. این گروه دارای ستونهایی با فولاد گذاری عرضی در تمام ارتفاع ستون بر طبق ضوابط آیین نامه بتن ایران (آبا) است. همچنین در این گروه، دو ستون در وسط و پایین آن دارای وصله اورلپ و دو ستون دیگر دارای میلگردهای فورج شده میباشد. پایش (Monitoring) مصالح شامل: جابجایی، تنش و کرنش فولادهای طولی (در سه محل مختلف در ارتفاع ستون) و عرضی و بتن در هر مرحله از اعمال بار محوری بکمک حسگرهای مختلف نصب شده بر آنها، صورت گرفته است. مقادیر آزمایشگاهی (پایش) قرائت شده با نئوری مورد ارزیابی قرار گرفته است. نتایج پایش و تخریب ستونها، خصوصا در مناطق زلزله خیز، حاکی از عملکرد رضایت بخش وصله اورلپ نسبت به فورجینگ دارد. هرچند در تنشهای خدمت و تحلیلهای خطی عملکرد دو روش بسیار بهم نزدیک است.
In this paper, four short reinforced comcrete (RC) columns with circular section has been built at university lab that are classified in one group. The group consists of columns with stirrups along their height related to Iran Concrete Code (ABA). In this group, two columns consist of forge welded steel bars at mid-height and their bottom, and two others contain overlap spliced at the same locations. To record displacements, tension and strain of steel bars and concrete for ever step of uniaxial loading, different types of gauges has been installed at different places. For monitoring purpose, the gauges are connected to Data Logger and computer for further analysis. The results of monitoring and the theoretical works are shown that, specially in earthquake zones, overlap splice acts satisfactorily in compare to forge welded steel bars although, both methods of forge and splicing have same behavior in service loads.
https://www.jcsm.ir/article_60857_deb3a6639d3019401d08618e432cf281.pdf
پایش
ستون بتنآرمه
وصله اورلپ میلگرد
فورجینگ
بار محوری
monitoring
RC columns
Overlap splice
forging
Uniaxial load